Embossed · Gold
Gold Oval Dimple Embossed
Gold oval dimple embossed stainless steel sheet: rows of small oval dimples in bright PVD gold, a fine sparkling texture for feature walls and lifts.
AFP on orderGold PVD
See it on my wallSee this sheet in 3D
Specification
| Finish | Embossed |
|---|---|
| Colour | Gold (PVD) |
| Code | SMN-GEM-03 |
| Grade | SS 304 / SS 202 |
| Thickness | 0.8 – 2.0 mm range — tell us the thickness you need |
| Sheet size | 1220 × 2440 mm; other sizes available on request |
| Anti-fingerprint | AFP on order |
| Surface direction | Ask SMN |
| Protective film | Ask SMN |
About this surface
Small oval dimples are pressed into the sheet in neat rows, then finished in bright PVD gold. Each dimple catches the light, so the wall sparkles and shows depth up close, and reads as an even texture from a distance.
For feature walls, lift interiors, bar fronts, column cladding and retail displays. Grades SS 304 / SS 202, thickness 0.8 to 2.0 mm. Laser cutting ready; ask SMN before bending.
For architects & specifiers
Specification text
Ready to paste into a BOQ, a drawing note or a tender. Fill in the thickness for the location.
Designer stainless steel sheet: Gold Oval Dimple Embossed (SMN code SMN-GEM-03), as supplied by SMN Industries, Delhi NCR. Finish: Embossed. Colour: Gold (PVD coloured). Grade: SS 304 / SS 202 (confirm for the location). Thickness: ___ mm (available: 0.8 – 2.0 mm). Sheet size: 1220 × 2440 mm. Protective film to stay on until installation is complete. Anti-fingerprint (AFP) coating: on order, where required. Approve a physical sample before ordering; supply each area from one batch.
Gold Oval Dimple Embossed on a feature wall · 3D visualisation — open the 3D studio to try other roomsDownloads
- Data sheetFinish, colour, code, grades, sizes and processing — print or save as PDF
- Seamless texture2048 px JPEG that tiles without seams (about 600 mm) for 3D software · free registration
- Full-size photoThe studio plate as a large JPEG · free registration
- See it in 3DA lift cabin, hotel lobby, lounge, kitchen, corridor, bar or bathroom clad with this sheet
Processing
Cutting, bending & fabrication
Suitability for common processes. Where a rating is not yet verified, ask SMN before you plan the work.
SuitableConditionalConsult SMNNot recommendedNot yet verified
Laser cuttingSuitable
BendingConsult SMN
Ask SMN with the bend radius: it depends on the relief.
V-groovingNot yet verified
FormingNot yet verified
FabricationNot yet verified
WeldingNot yet verified
Next step
See the real surface before you specify
Screens change colour and texture. Ask for physical samples of the finishes you are considering, or tell us about your project.