Embossed · Silver
Silver Oval Dimple Embossed
Silver oval dimple embossed stainless steel sheet: natural steel with rows of small oval dimples, a crisp texture that hides marks well.
AFP on orderSilver (natural, uncoated)
See it on my wallSee this sheet in 3D
Specification
| Finish | Embossed |
|---|---|
| Colour | Silver (natural stainless steel, no coating) |
| Code | SMN-SEM-03 |
| Grade | SS 304 / SS 202 |
| Thickness | 0.8 – 2.0 mm range — tell us the thickness you need |
| Sheet size | 1220 × 2440 mm; other sizes available on request |
| Anti-fingerprint | AFP on order |
| Surface direction | Ask SMN |
| Protective film | Ask SMN |
About this surface
Rows of small oval dimples pressed into natural stainless steel. The texture breaks up reflections and hides fingerprints and small marks, while the bright steel keeps a clean, modern look.
For lift interiors, kitchens and counters, column cladding, retail fixtures and public interiors. Grades SS 304 / SS 202, thickness 0.8 to 2.0 mm. Laser cutting ready; ask SMN before bending.
For architects & specifiers
Specification text
Ready to paste into a BOQ, a drawing note or a tender. Fill in the thickness for the location.
Designer stainless steel sheet: Silver Oval Dimple Embossed (SMN code SMN-SEM-03), as supplied by SMN Industries, Delhi NCR. Finish: Embossed. Colour: Silver (natural stainless steel, uncoated). Grade: SS 304 / SS 202 (confirm for the location). Thickness: ___ mm (available: 0.8 – 2.0 mm). Sheet size: 1220 × 2440 mm. Protective film to stay on until installation is complete. Anti-fingerprint (AFP) coating: on order, where required. Approve a physical sample before ordering; supply each area from one batch.
Silver Oval Dimple Embossed on a feature wall · 3D visualisation — open the 3D studio to try other roomsDownloads
- Data sheetFinish, colour, code, grades, sizes and processing — print or save as PDF
- Seamless texture2048 px JPEG that tiles without seams (about 600 mm) for 3D software · free registration
- Full-size photoThe studio plate as a large JPEG · free registration
- See it in 3DA lift cabin, hotel lobby, lounge, kitchen, corridor, bar or bathroom clad with this sheet
Processing
Cutting, bending & fabrication
Suitability for common processes. Where a rating is not yet verified, ask SMN before you plan the work.
SuitableConditionalConsult SMNNot recommendedNot yet verified
Laser cuttingSuitable
BendingConsult SMN
Ask SMN with the bend radius: it depends on the relief.
V-groovingNot yet verified
FormingNot yet verified
FabricationNot yet verified
WeldingNot yet verified
Next step
See the real surface before you specify
Screens change colour and texture. Ask for physical samples of the finishes you are considering, or tell us about your project.