Grade guide: SS 304 or SS 202

SS 304 offers higher corrosion resistance and suits humid, coastal or high-exposure areas. SS 202 is a cost-effective choice for indoor decorative work. If you are unsure, tell us where the sheet will be used and we will advise.
The difference
Both are stainless steels. SS 304 contains more nickel, which gives it better resistance to rust and staining. SS 202 replaces part of the nickel with manganese, which makes it more economical but less resistant to moisture and salt.
Where each grade suits
- SS 304: coastal cities, bathrooms and wet areas, kitchens, building entrances, exteriors under cover, and lifts or lobbies that are cleaned often.
- SS 202: dry indoor decorative work such as feature walls, furniture trims, ceilings and indoor lift cabins away from moisture.
Same look, different life
Both grades take the same finishes and PVD colours, so they look the same on the day they are installed. The difference shows over time in damp or salty air.
A magnet is not a reliable test
Some stainless steels become slightly magnetic after polishing or forming, so a magnet cannot tell 304 from 202. Ask for the grade on the invoice.
Thickness and size
SMN sheets come in 0.8 to 2.0 mm, standard size 1220 × 2440 mm, other sizes on request.

See the real surface before you specify
Screens change colour and texture. Ask for physical samples of the finishes you are considering, or tell us about your project.